Description

At the SME EASTEC Show we presented closed-loop machining using touch trigger probes.

Documents

	Eastec demo walkthru.ppt, A walk-through of the EASTEC demonstration.
	AP238_Pitch_Eastec_2005_rev1.pdf, Boeing's presentation at the EASTEC Technical Pavilion.
	STEP_Tools_Eastec.ppt, STEP Tools' presentation at the EASTEC Technical Pavilion.
	placard-figure-full-2.ppt or placard-figure-full-2.pdf, block diagrams of the May 2005 EASTEC demonstration.
	eastec-scenario.pdf, the scenario for the EASTEC demo.

Data Repository

	Eastec.zip, Slides from the EASTEC presentation, example STEP files and MPF files.
	PH_V520_V10_GB.zip, documentation for the Heidenhain MillPlus targeted for the demonstration [11 MB zipped PDF].
	testpiece_single.stp, the STEP AP-203 geometry file for the representative jet engine casing targeted for the demonstration [383 KB].
	TESTPIECE.MC9, a Mastercam file for the casing [1.1 MB].

Meeting Minutes

10 June 2005 Telecon

2 June 2005 Telecon

5 May 2005 Telecon

28 April 2005 Telecon

22 April 2005 Telecon

14 April 2005 Telecon

8 April 2005 Telecon

31 March 2005 Telecon

17 March 2005 Telecon

Contact:

Fred Proctor
National Institute of Standards and Technology
100 Bureau Drive, Stop 8230
Gaithersburg, MD 20899-8230
Email: frederick.proctor@nist.gov
Voice: 301-975-3425
FAX: 301-990-9688

* No approval or endorsement of any commercial product by the National Institute of Standards and Technology is intended or implied. Certain commercial equipment, instruments, or materials are identified in this report in order to facilitate understanding. Such identification does not imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.

The National Institute of Standards and Technology is an agency of the U.S. Department of Commerce, located 25 miles north of Washington, D.C. in suburban Gaithersburg, Maryland. A map to NIST is available on-line.

isd-webmaster@cme.nist.gov

Date created: 22 October 2004
Last updated: 1 June 2005