Meeting Minutes
31 March 2006 Telecon

In attendance:

Fred Proctor, NIST
Martin Hardwick, STEP Tools Inc.
David Odendahl, Boeing
Sid Venkatesh, Boeing
Alain Brail, Airbus
Alan Crawford, LSC

It was agreed that the demonstration would show feature-based rough
machining and toolpath-based finish machining. 

Boeing's fallback position on a Boeing part for the demo will be to
take a 5-axis part, adjusted so as not to be proprietary. Boeing will
do finish cutting using explicit toolpaths, beginning with stock
resulting from feature-based roughing.

The demonstration will show the following: 

Video of Boeing cutting the Boeing part, with artifact to show
Video of Airbus cutting the Boeing part, with artifact to show
Live demo of Airbus cutting the Airbus part

Test files will be exchanged ASAP so that all players can try some
early tests and discover any incompatibilities.

Action Items
------------
* Fred Proctor will inquire about Ted Vorburger's presence at the ISO
  meeting and plans to present AP 219.

* Fred Proctor will add material relevant to the Toulouse demo on the
  NIST STEP-NC web site.

* Fred Proctor will write up a scenario to accompany the graphical
  depiction.

* Alain Brail will work on the Wednesday demo schedule, and
* Martin Hardwick will work on the schedule for the rest of the week,
  collaboratively so they will fit together nicely.

* Alan Crawford will send Martin Hardwick an AP 224 file of the Airbus
  part, post-roughing, to identify the features to be used for the demo.

* Alain Brail will send David Odendahl the Catia process file for the
  Airbus part, through Fred Proctor and the web site. 

* David Odendahl will send Alain Brail an AP 238 file with the
  finishing toolpaths.

* Fred Proctor will set up a teleconference for Tuesday 18 April,
  3:00 pm GMT, 10:00 am EDT, 7:00 am PDT, 4:00 pm European Summer Time.

* Alan Brail will set up a WebEx conference for the same time.

As recorded by Fred Proctor on 31 March 2006.